C183 is the cable to connect with the D-sub 9-pin male connector of the C101A or C102A for power supply, HV supply, signal readout, test pulse input, and communication with the offset controller.
Specifications
| Cable length | 1.5 meters (Power supply cable and communication cable are approximately 2 meters) |
| Configuration of the connector and the cable | Connector for charge sensitive preamplifier side; D-sub 9-pin female External side; 1) Signal OUT: BNC(P) connector + RG174 cable 2) Detector bias IN: BNC(P) connector + RG316 cable (BNC(J)-SHV(P) conversion cable is attached) 3) Test pulse IN: SMA(P) connector + RG174 cable 4) Power supply IN: D-sub 9-pin male with lock guide Pin#1: GND Pin#2: GND Pin#4: +12 V Pin#9: -12 V 5) Communication connector for built-in offset controller of C101A or C102A: XH connector 3-pin female Pin#1: GND Pin#2: RXD (Connect with TXD of PC side) Pin#3: TXD (Connect with RXD of PC side) |